The History, Styles and Caring for Antique Mirrors.

Spectacular Eagle Convex Gilt Mirror

The History of Mirrors

Antique mirrors were first known by the name ‘looking glasses’ and they were first produced in Murano and silvered in Venice as early as the 16th Century. They were not made in England until the 17th century, It was Sir Robert Mansell’s glass house in London in 1625 where they were first made by the cylinder process (where cylinders of glass were blown then split open and laid flat), and then by the Duke of Buckingham at his famous glass works at Vauxhall. The limitations of this process meant that only small plates could be made so several pieces of glass would be used to create a single mirror. By the late 18th century larger and better quality plates were being produced enabling more larger and decorative mirrors to come onto the market. These were free standing and fitted onto antique furniture.

During the latter half of the 18th and 19th century, framing styles changed dramatically from elegantly carved gilt wood mirrors of the Chippendale period to beautiful polished frames like the antique cheval mirror of the Victorian period.

Did you know antique mirrors were recycled as early as the 1700s.

Recycling is a large part in today’s life and there was actually a form of recycling that started in the 18th century. There was a heavy tax on glass coming from abroad. Because of the failure of English factories to make large mirror plates in that period, it dictated the form and development of the mirror being created in Britain at that time. To avoid the tax and costly import of the larger mirrors from France, old mirrors were recycled. Larger mirrors were produced by creating frames which held several pieces of recycled glass, this gave the illusion of a single larger mirror. This continued  until the late 18th century when far bigger mirrors with much lighter frames were being produced.

By the beginning of the 19th century there was a rise in the popularity of small antique mirrors again, like the convex mirror. The convex mirror was produced for the dining room and its purpose was for the butler to keep an eye on the progress of a meal without having to move around the room disturbing people dining.

Eagle Feature

This Spectacular Eagle Convex Gilt Mirror features a carved eagle and raised balls on the carved frame with original convex mirror.

Spectacular Eagle Convex Gilt Mirror

The development Mirrors

Antique mirrors were very rare up to the 1700’s. As the production of mirrors improved, more were made and larger, more grand versions came into existence. Large mirrors were still very expensive but the smaller wall mounted mirrors were cheap enough for people to buy. Earlier examples were made from pine with gilding finish and would often have pediments on the top with a prominent central motif in the form of an exotic bird or spread eagle.

Mirror with decorative features

This mirror is flanked by column sides topped with Corinthian style capitals and decorative features.

19th Century mirror frames were often in Mahogany, due to the beautiful finish and the durability of carvings produced. Sometimes they were inlaid with a shell pattern. Adam and Hepplewhite, designed more delicately proportioned mirrors, oval and rectangular in shape, with simpler scroll work, inlaid vase or similar classical motif. Adam preferred gilt work usually on a soft wood and Hepplewhite usually used mahogany.

Dressing and Cheval Mirrors

It was not until the late 17th Century that dressing mirrors became free standing. To begin with they were made of silver or silver gilt with trestle. During the later half of the 1600’s, Venetian and Parisian craftsmen supplied beautifully decorated toilet mirrors. In the early 18th century many antique dressing tables were designed with collapsible mirrors fitted into the tops of the tables. This was also seen in some antique chests of drawers. Early 18th Century toilet mirrors were sturdier in construction, and standing on plinth bases which had small drawers. The best were serpentine fronted and usually rectangular. It was not until the 1770’s that the oval shape mirror became available.

Elegant Victorian Mahogany Antique Dressing Table Mirror

This Elegant Victorian Mahogany Antique Dressing Table Mirror circa, 1870 has an oval moulded tilting bevelled mirror that has splayed shaped sides and a beautifully turned cross stretcher.

Antique cheval mirrors or also known as ‘standing dressing mirrors’ were first made in Paris. By the 1800’s large plates of glass could be cast, and the free standing mirror known as the antique cheval mirror became very popular. ‘Cheval’ means horse in French, and the name given to the mirror refers to its four supporting legs.

antique cheval mirror

Above is an example of a Victorian Mahogany Cheval along side an elegant Regency Satinwood Antique Cheval Mirror. Both have the original tilting mirror and quality brass fittings.

Caring for your Antique Mirrors

If you want to care for your antique mirrors correctly, there are several things you can do. If the silver backing of a mirror has deteriorated (Foxing is a term when the silvering in antique mirrors goes misty and sometimes looks bitty), repair should not be attempted until investigation have been done, as any restoration can devalue the piece especially on very early examples. First check with an expert if repairing the silver will de-value the piece as some collectors will only buy with the original silver.

Cleaning the wood frame of your Mirror

To clean and restore the wood frame on your antique mirror, try the following. Use polish revive on a clean cloth and rub firmly in the direction of the wood grain. This will remove years of dirt without damaging the original patina. Once the dirt is removed, finish using a good quality bees wax.

Traditional methods used to clean the glass on mirrors.

The first is to wipe the glass with a lint free linen cloth moistened with methylated spirits. The second is to wipe the glass with a lint free cloth which has been wrung out in lukewarm water to which a few drops of ammonia have been added. Lastly you can lightly moisten a lint free cloth with paraffin and wipe the glass. This last method works well, but leaves a small of paraffin in the air for some time. We fine one of the most successful ways is to wipe over the glass using very fine wire wool and then buff with a clean cloth.

Whichever method is chosen, it is essential to avoid and moisture getting behind the glass, as this will cause further deterioration of the silvering.

Remember it is nice to see some foxing in the mirror as this adds to the character of the piece and I recommend you should never replace the old glass unless absolutely necessary.

If you want the original glass but with no foxing then you can try the following method –

Remove the glass and scrape all the old silvering off the back of the mirror. Get a very thin piece of modern mirror cut to the same shape. When pushed onto the old glass it causes a vacuum effect and sticks to the old glass so then you can have the benefits of the old mirror but that is usable.

Styles of Antique Mirrors

Antique mirrors were first produced in Murano and silvered in Venice in the 16th Century. In the 17th century, Sir Robert Mansell’s glass house in London made mirrors in the cylinder process. It wasn’t until the 18th century that larger and better quality plates were produced enabling more larger and decorative mirrors to come onto the market.

Here at Driscolls Antiques we have beautiful selection of antique mirrors for sale. Here are a few examples that we have previously sold.

Antique Mirrors

Dating from around 1850 in the Victorian period this beautiful over-mantle mirror has a gilt finish and stunning carved detailing. It is topped by a delightful cherub sat amongst finely carved fern leaves, this foliage is replicated on the corners at the base of the mirror. The edges have a wonderful carved design, the top corners are especially ornate, framing the mirror perfectly. The mirror itself is shaped with a bevelled edge. This antique mirror would be the perfect finishing touch above a grand fireplace, large console table or credenza.

Victorian Gilt Antique Cherub Over-Mantle Mirror.

From the William IV period and is constructed from a lovely mix of rosewood and oak, this inverted break fronted moulded mirror has a rosewood central panel with inlaid decoration. It is framed by elegant half rounded columns and is the perfect finishing touch for a hallway or landing.

William IV Rosewood & Oak Antique Mirror.

This highly desirable Regency overmantle mirror dates from around 1830 and is beautifully decorated with a gilt finish. The inverted break fronted moulded cornice sits above decorative reeded columns finished with acanthus leaves and topped with a lovely rose motif. The mirror is framed by ebonised reeded edges which contrast beautifully with the gilt finish of the outer frame. The gilt finish is very impressive and allows this antique mirror to create a fabulous impression in a period room. Delightfully it still retains the original mirror which unsurprisingly displays genuine ‘foxing’ through age and adds to the overall beauty and authenticity of the piece.

Antique Regency Decorative Gilt Overmantle Mirror.

This Decorative Edwardian Antique Convex Mirror circa, 1900 has a circular moulded frame with turned projections and the original convex mirror.

Decorative Edwardian Antique Convex Mirror

This unusual pair of vintage mirrors are unusual due to being a matching pair, they have gilt scrolled decoration with delightful cherub face shelving.

Pair Of Antique Decorative Cherub Gilt Mirrors

4 Comments. Leave new

  • Hi, quick question, is it possible to have foxed mirrors professionally restored? And if so, is it really expensive?

    Many thanks 🙂

    Reply
    • Hi
      There used to be companies who could do this but I have found it very difficult to find one recently. the best way around this is to scrape off the old silver on the back of the mirror, then get a very thin new mirror cut to the same size. place this onto the back of the old mirror and put back into the piece of furniture. this way you still keep the old glass but with a mirror that you can use. I hope this helps
      Kind regards
      James

      Reply
  • Hi, quick question, is it possible to have foxed mirrors professionally restored? And if so, is it really expensive?

    Many thanks 🙂

    Reply
    • Hi
      There used to be companies who could do this but I have found it very difficult to find one recently. the best way around this is to scrape off the old silver on the back of the mirror, then get a very thin new mirror cut to the same size. place this onto the back of the old mirror and put back into the piece of furniture. this way you still keep the old glass but with a mirror that you can use. I hope this helps
      Kind regards
      James

      Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.